Tag: <span>brionvega</span>

Brionvega RR126 in ANTWERP brionvega - en

Brionvega RR126 Alexa – en

BRIONVEGA RR126 MANAGED BY VOICE ASSISTANT

BRIONVEGA RR126

This page is the result of an eccentric and courageous request sent to us by a particularly demanding customer.

We were asked to set up a Brionvega RR126 radiophonograph to be managed by voice commands  ALEXA.
We studied the problem and made the necessary modifications and inserted actuators so that this RR126 works with voice command.
As you can see in the video, this device turns on and off, adjusts the volume, chooses songs with voice commands, in this case implemented by Alexa.
Although tested with ALEXA this special version of RR126 works with any voice assistant, be it Siri on Apple HomePod, Google Assistant on Nest mini and of course Amazon Alexa on board Echo Dot!
And of course it also works with traditional controls, like a normal Brionvega RR126.

Brionvega Totem RR130 brionvega - en

Brionvega Totem RR130 – en

Brionvega Totem RR130

BRIONVEGA RR130 - TOTEM

Brionvega is certainly the Italian brand of electronic equipment that left the deepest mark in the history of world design.
On this page, one of the most beautiful equipment of the Brionvega is presented: the TOTEM RR130.
It was designed by the architect and designer Mario Bellini in 1970.

Eight times Compasso d'Oro, Bellini counts among his most famous creations the Centro Espositivo e Congressuale di Villa Erba (Exhibition and Congress Center of Villa Erba) in Cernobbio, the Tokyo Design Center in Japan, the America Headquarters of Natuzzi in the United States, the National Gallery of Victoria in Melbourne, the Headquarters of the Deutsche Bank in Frankfurt, the Department of Islamic Arts at the Louvre in Paris, the new Convention Center in Milan.

The Brionvega Totem, along with others of Bellini's works, is exhibited at the MOMA in New York. It is visible on this page of the museum.

When closed it looks like a smooth cube of 51 cm per side.
Once opened, the turntable, the console and the two adjustable and removable speakers are found.
The turntable is a beautiful DUAL 1257 with a magnetic cartridge DUAL DN145E. The turntable and the cartridge will be analysed in detail later.
The central body includes a 22W stereo amplifier, an AM/FM tuner and a muzak receiver.

The Totem project follows the famous RR126 Radiofonografo. The two devices share different circuits, but several improvements and updates have been implemented in the Totem.

The acoustic quality is interesting. Leaving the speakers in their rotating supports, the distance between them is sufficient to guarantee a fair stereo separation, even if the best results are surely obtained by extracting the speakers from their supports and placing them at a distance of more than 1,5 meters.
The power is more than enough to fill medium-sized environments.
Rather than the frequency response, which is still quite linear, the most interesting feature is the kind of musicality the device can express. In fact, the sound is warm and mellow, close to the sound of tube amplifiers. This result derives from the type of circuit with a low negative feedback rate and the use of fair components, in complete contrast to the projects of Japanese derivation that were so fashionable in the 1970s.

A musicality with these features, a brilliant design, such a strong personality have determined its remarkable commercial success.

In our restorations we propose a small modification to the loudspeakers by equipping them with a brighter tweeter, which associated with the insertion of a bluetooth 5.1 circuit or of a wi-fi connection allows the listening of liquid music or any web-station of the world with a satisfying level of pleasantness in the listening.

The aesthetic remains absolutely unaltered but the sound changes significantly, becoming considerably more precise and free of disturbances.

Almost all the devices that are sent to us are stained, yellowed and with damaged edges.
For this reason we have equipped ourselves for the total double repainting (white and anthracite) and the screen printing of all the front and back writings.

These incredible restorations are photographically documented at the bottom of the page in the dedicated section.

BRIONVEGA RR130

Brionvega Totem RR130

 

BLUETOOTH

Bluetooth receiver embed

READ MORE >

CONNESSIONE A DISPOSITIVI DIGITALI

Each radio is equipped with a cable for connection to any digital device.

READ MORE >

TUBESOUND IMPROVEMENT

- Bluetooth receiver embed - The unit is equipped with a BLUETOOTH receiver powered directly by the receiver power supply. This makes it possible to control the amplifier from any external digital device as an IPAD, a Smartphone, or a sophisticated multimedia station. So you can hear your preferred web station or your lossesless file without cables on the room. Wireless Receiver can be equipped upon requests.
- Multi Platform Connection - A customized adaptation cable to connect any digital device as Iphone, Smartphone, Laptop, CD Player etc. will be provided with this radio. This special cable suits the different impedances between the modern equipment and the receiver. Furthermore the two stereo channels flow into one without increasing the load to the input unit.

Brionvega

 

Brionvega

 

HISTORY

In 1945 in Milan, Giuseppe Brion and the engineer Leone Pajetta founded the B.P.M. (Brion Pajetta Milano), electronic component production company.
At the beginning of the 50s the company specialized in the production of radio devices and becomes the Vega B.P. Radio.
At the beginning of the 60s specialized in the production of Tvs and becomes Radio Vega Television.
In 1963, the company takes the definitive name of Brionvega.

Brionvega since ever had world-known designers and produced objects that are exposed in the most famous international museums.
Among the firsts designers Zanuso and Sapper, 1964, that projected the portable TV Algol 11 (picture on the bottom left) and the radio TS 502, the “cube” (picutre on the bottom right).
In 1965 the Castiglioni brothers (ppicture on the top left) signed then the Stereophonic Radiofonografo RR126.
In 1970 the designer Mario Bellini traces the shape of the stereo system “Totem” (picture on the top right).
In 1992, the company is sold by the Brion family to the Seleco.
In 1997 Seleco goes out of business and Brionvega, controlled, does so.
In 2004 SIM2 Multimedia has acquired the part of the Brionvega company dedicated to the radio production.
In 2010 SIM2 Multimedia acquires also the TV sector of the historical italian brand.

Brionvega Totem RR130

Brionvega

 

MAIN FEATURES

Year of production: 1970

Wavebands:

Long wave (OL), Medium wave (OM), FM

AC Voltage: 110; 125; 160; 220 Volt

6 loudspeakers

Dimensions (LHD): 510 x 510 x 510 mm / 20.1 x 20.1 x 20.1 inch (closed)
Net weight: 70 lb 8 oz

26 Transistors:

Brionvega Totem RR130

TURNTABLE

The turntable used in the Totem is the DUAL 1257.
This is an excellent semi-automatic equipped with a DUAL 16-pole motor, with belt transmission and a very heavy plate, for an excellent rotation stability; wow and flutter, in fact, remain within a small 0,05%.
The belt transmission and the detachment of all the not necessary mechanisms during operation allow to reach a signal / noise ratio of 68dB.
The 1257 is equipped with stroboscope and fine adjustment of the speed. It is also provided with micrometric adjustment of the bracket weight and separate Antiskating settings for Conical or Elliptical stylus.

The magnetic cartridge is a DUAL DN145E. This is a cartridge with diamond elliptical stylus built by Ortofon.
A frequency response is declared from 10Hz to 28,000Hz with an output level of 4.0mV
The dimensions of the elliptical stylus are 6 x 18 μm.
The manufacturer recommends adjusting the weight to 1,5 gr.
The load resistance is 47 kOhm.

Brionvega Totem RR130 Brionvega Totem RR130

VOLUME CONTROLS

The Totem RR130 is equipped with two separate volume controls.
- The first (LOUDNESS) changes the level by automatically changing the frequency response curve according to a physiological criterion (at low volume the bass and treble are enhanced).
- The second (VOLUME) changes the level, leaving the frequency response curve unchanged.
Both commands increase the overall output level.

Listening to LOW LEVEL: turn the volume knob to maximum and act only on the loudness knob to get the desired level.
Listening to MEDIUM LEVEL: turn the volume knob halfway and turn the loudness knob to get the desired level.
Listening to HIGH LEVEL: act on both the volume and loudness knobs to get the desired level.

Brionvega Totem RR130

CONTROL PANEL

 Left from the top we find two instruments:
- the FM signal level
- the centering of the station
Then we find the knobs of LOUNDNESS,  LEVEL, BALANCE, TREBLE and BASS.
Below we see the knob of the AM tuning which acts on the indicator of the three scales below SW, MW, LW.
On the right you can still see the FM tuning knob which acts on the scale up indicator, FM.

Brionvega Totem RR130

In the lower row of the panel we find a series of keys that have the following functions:
ON/OFF
AFC - Automatic Frequency Control
PHONO - Turntable
TAPE - Tape Recorder
FD - Muzak
LW - Long Waves
MW - Medium Waves
SW - Shortwave
FM
Finally we find six keys numbered from 1 to 6 with which you can choose the channels of the muzak.

LOUDSPEAKERS

Each speaker is equipped with three cone speakers, a woofer, a midrange and a tweeter.

Curious is the electrical connections between loudspeakers and amplifier. It is obtained simply by inserting the loudspeakers box into the appropriate support tube, equipped with slide contacts.

The woofer and the mid are quite adequate to the characteristics of the amplifier.
The tweeter is a little silky, soft, it lacks a bit in transparency in the higher frequencies.
This feature was totally irrelevant in radio reproduction, while using the Totem for listening to liquid music or other digital sources we prefer to replace the tweeter with a more modern and brilliant one.
Also the reproduction of vinyls benefits considerably from this.
Of course, in our restorations, the modification leaves the external aesthetics completely unchanged.

Brionvega Totem RR130

REAR SIDE

Output for external speakers.

Socket for recorder (tonbandgerat).

Turntable input (Tonabnehmer)

AM and FM aerial inputs and ground socket.

Power fuse and loudspeakers fuse.

ELECTRONIC AND CABINET RESTORE

THE USUAL AMAZING LAST IMAGE
Brionvega Totem RR130
Brionvega RR126 in ANTWERP brionvega - en

Brionvega RR126 – en

BRIONVEGA RR126

BRIONVEGA RR126

Brionvega is certainly the italian elecronic equipment brand that the most left a sign into the world design history.
Brionvega masterpiece, the Radiofonografo Stereofonico Brionvega RR126.
It has been projected by architects Giacomo and Achille Castiglioni in 1965.

The RR 126 has been projected as “stereophonic high fidelity device”.
When it appeared on the market, it was welcomed with a big selling success.
It was available in white, lobster, and wood. The white one was the most requested.
It has been a revolution in the design of the home devices for the listening of the music.
Thanks to its modular structure, that allows to put the speakers on the top of the central body so that a cube is shaped, or on the side of the central body so that a parallelepiped is shaped.

Thecnically the circuit is typical, except for what refers the stereo decoder that is preamplified alone.
The original sound of the bi-conic speakers is a little defective in the high and low part of the range, and a little bit enclosed.
For this reason we always suggest in our refurbishments an internal adjustment to the speakers, introducing a little mask that bends the loudspeakers towards the center to focalize better the listening, and also the radical replacement of the original loudspeakers with modern 3-ways ones, projected to work in a limited-dimension sounding board.
The aesthetics remains absolutely unmodified but the sound changes deeply, widening, opening and getting significantly more precise.

Almost all the white or lobster models, when they come to us, are spotted, yellowed and with damaged edges.
For this reason we are equipped for the whole double varnishing (white and dark brown) and for the serigraphy of all the incriptions, anterior and posterior.

These incredible refurbishments are documented by pictures at the bottom of the page in the dedicated section.

Breaking news: the RR formerly owned by David Bowie has been auctioned in London for 324.000 pounds.

BRIONVEGA RR126

Brionvega

Brionvega

 

BLUETOOTH

Bluetooth receiver embed

READ MORE >

MULTI PLATFORM CONNECTION

Each radio is equipped with a cable for connection to any digital device.

READ MORE >

IMPROVED LOUDSPEAKERS

The kind of the loudspeakers is changed.

READ MORE >

TUBESOUND IMPROVEMENT

- Improved loudspeakers - The modest bi-conic original loudspeakers can be replaced, with pertinent changes, by brillant 2/3 ways loudspeakers with a significant improvement of the device's sounding performances.
The adjustment is completely invisible.

- Bluetooth receiver embed – The unit is equipped with a BLUETOOTH receiver powered directly by the receiver power supply. This makes it possible to control the amplifier from any external digital device as an IPAD, a Smartphone, or a sophisticated multimedia station. So you can hear your preferred web station or your lossesless file without cables on the room. Wireless Receiver can be equipped upon requests.

Multi Platform Connection – A customized adaptation cable to connect any digital device as Iphone, Smartphone, Laptop, CD Player etc. will be provided with this radio. This special cable suits the different impedances between the modern equipment and the receiver. Furthermore the two stereo channels flow into one without increasing the load to the input unit.

Brionvega

 

Brionvega

 

HISTORY

In 1945 in Milan, Giuseppe Brion and the engineer Leone Pajetta founded the B.P.M. (Brion Pajetta Milano), electronic component production company.
At the beginning of the 50s the company specialized in the production of radio devices and becomes the Vega B.P. Radio.
At the beginning of the 60s specialized in the production of Tvs and becomes Radio Vega Television.
In 1963, the company takes the definitive name of Brionvega.

Brionvega since ever had world-known designers and produced objects that are exposed in the most famous international museums.
Among the firsts designers Zanuso and Sapper, 1964, that projected the portable TV Algol 11 (picture on the bottom left) and the radio TS 502, the “cube” (picutre on the bottom right).
In 1965 the Castiglioni brothers (ppicture on the top left) signed then the Stereophonic Radiofonografo RR126.
In 1970 the designer Mario Bellini traces the shape of the stereo system “Totem” (picture on the top right).
In 1992, the company is sold by the Brion family to the Seleco.
In 1997 Seleco goes out of business and Brionvega, controlled, does so.
In 2004 SIM2 Multimedia has acquired the part of the Brionvega company dedicated to the radio production.
In 2010 SIM2 Multimedia acquires also the TV sector of the historical italian brand.

Brionvega

 

Brionvega

 

MAIN FEATURES

Year of production: 1965

Wavebands:

Long wave (OL), Medium wave (OM), FM

AC Voltage: 110; 125; 160; 220 Volt

2 loudspeakers

Dimensions (LHD): 295 x 476 x 144 inc
Net weight: 70 lb 8 oz

27 Transistors: BC109 BC109 AF121 AF125 AF121 AF116 AF116 AF116 AF121 BC114 AF126 AF126 AF126 AF126 BC119 BC154 AC127 AC132 AD149 AD149

Brionvega RR126

SEPARATE CONTROL TUNING AND SEPARATE DIALGLASSES

The device is provided of dedicated tuning mechanisms for AM and FM bands.
Even the dial glasses are two, separated and symmetrical for a big visual impact.
Big part of the personality of this device comes from this choice of design.

CONTROL PANEL

Starting from the left, on top we find the dial glass of the AM bands and the related knob for the tuning, the strength tuning indicator, the indicator of the stereo station (green), and the power on one (red). Finally on the right we find the FM scale and the related tuning knob.
Below we have the buttons for Long, Medium, Short Waves, FM Mono, FM Stereo, Turntable Mono, Turntable Stereo, AFC, Tape Recorder.
Further below we have the Power On / Bass, Treble, Balance, Volume, Input Level knobs.

Brionvega RR126
Brionvega RR126

LOUDSPEAKERS

The loudspeakers are two, one per speaker.
The reproduction of treble and basses is naturally not so linear.
For this we suggest, in our refurbishments, an adjustment that leaving completely unmodified the exterior aesthetics transforms completely its sound characteristics.

REAR SIDE

Output for external speakers.

Socket for recorder (tonbandgerat).

Turntable input (Tonabnehmer)

AM and FM aerial inputs and ground socket.

Brionvega RR126

ELECTRONIC RESTORE

THE USUAL AMAZING LAST IMAGE
Brionvega RR126